You do not need to be told that a cold heat soldering iron will always be helpful to you whenever out to accomplish simple soldering tasks. It is well designed to enable it transfer heat very fast and within a large surface area thus its effectiveness cannot be questioned whatsoever. The end of this iron is made using multiple electrodes of different forms and will in most cases form a circuit once the power connection is complete. This is simply a touch on how this tool operates but it is important you understand how to use it before getting deep into that. You have nothing to worry about as far as that is concerned since this article will take care of the same in a detailed manner that you will understand easily.
Setting up the iron is the first step to undertake in getting to know how it is used. This will give you enough space to remove off all the covering used for protective purposes and this should be concentrated more at the tip. Place in the tip into the opening that is on the one end of the iron and make sure they fit in well. Turn to the battery and remove all the screws used to attach it using the necessary tools and then get it off such that the unit is left open. This will allow you an easy access to the inner parts of the iron so do not undermine the importance of undertaking this step.
Make sure you have put in the right type and size of batteries since that is where the unit will draw its power from. Furthermore, you will have to ensure that both positive and negative ends are connected to their right pots without making misplaced connections. If positives are connected to the negatives and vice versa then the iron might fail to function. Actually, this is something that you must be very careful about not to mess up everything. Once that is done successfully, it is time to return the cover and stiffen it with the screws.
Turning on the iron should be the next obvious thing for you to do and that will indicate whether your mission has been successful or not. If the light denoting power usage turns red in color then you will know that your cold heat soldering iron is functioning well and ready for use. Anything different from that should give you some food for thought. Remember that the iron must be connected to a metal that is highly conductive of heat before getting to function well which you should bear in mind as well. The tip should also be fully soldered so as to make the circuit complete. When not in use, the iron tip should be disconnected from the contact areas because heating will be sustained even when not necessary.The iron does not work well under intense pressure so do not subject it to that if at all you want to have a better output.